Author Topic: Wanted: Front and Rear Axle housings w/Diffs  (Read 489 times)

DBrands

  • Newbie
  • *
  • Posts: 44
Wanted: Front and Rear Axle housings w/Diffs
« on: June 14, 2018, 10:47 PM »
Still on the hunt for front and rear axle housings ideally with diffs. I'd like to rebuild some stronger axles/diffs but still drive the truck daily, so I'm looking for a second set to rebuild.

Thanks.
« Last Edit: August 27, 2019, 10:06 AM by DBrands »
David B

1990 D90 - 200TDI

binch

  • Club Admin
  • ******
  • Posts: 2033
  • Club Membership: Yes
  • Vehicle: 110, RRC, D11
Will RRC axle casings work???    I don't know if they are the same or not.......
Cheers, Bill

Bargrip

  • Club Member
  • *****
  • Posts: 62
  • Club Membership: Yes
  • Vehicle: 1984 90 200tdi
Never did the front, but I just swapped my back axle for a disco 1 (97 vintage) wanted rear disc's... straight forward swap just cut the abs connection stuff off and use the t-piece from your 90 for the brake line connection....
I have a drum brake back axle 10 spline if you wanted it for parts ...just come take it away....

headdamage

  • Sr. Member
  • ****
  • Posts: 310
  • Vehicle: RRC 200tdi, exmil 90, 2006 Duramax
At some point the RRC/Disco one had thicker radius arms. I have a 90 axle on the front of my RRC using 90 arms. Other than that the axle casings swap between 90's and RRC/Discos.

binch

  • Club Admin
  • ******
  • Posts: 2033
  • Club Membership: Yes
  • Vehicle: 110, RRC, D11
thanks Andrew ;)
Cheers, Bill

DBrands

  • Newbie
  • *
  • Posts: 44
Re: Wanted: Front and Rear Axle housings w/Diffs
« Reply #5 on: August 27, 2019, 10:10 AM »
I'm gonna bump this up, still on the hunt. Ideally someone has a RHD front axle with everything still attached... I don't mind what its from, as I can update to narrower radius arms if its newer. Going to do a full strip down and HD the internals.
David B

1990 D90 - 200TDI

DBrands

  • Newbie
  • *
  • Posts: 44
Never did the front, but I just swapped my back axle for a disco 1 (97 vintage) wanted rear disc's... straight forward swap just cut the abs connection stuff off and use the t-piece from your 90 for the brake line connection....
I have a drum brake back axle 10 spline if you wanted it for parts ...just come take it away....

Do you still have this one?
David B

1990 D90 - 200TDI

Matt H

  • Club Member
  • *****
  • Posts: 1163
  • Club Membership: Yes
  • Vehicle: RRC, Defender 110, LR4. Plus a bunch of other stuff that doesn’t run.
Re: Wanted: Front and Rear Axle housings w/Diffs
« Reply #7 on: August 27, 2019, 10:51 AM »
I have several full sets of disco 1 axles. Left Hand Drive though. You can have them hub to hub including the radius arms/trailing arms and anti sway bars if you want.  Standard gearing, 24 spline, disc brakes. They have 200,000 + km on them.
I’d take $300 each.

Located in Medicine Hat.
No Road Except For Land-Rover.