Recent posts

#71
Technical Discussions / Re: Install lap seat belts
Last post by mike.heathcote - July 06, 2026, 11:32 AM
Hey Craig, 

I think any of the three would work fine.  Biggest thing is the bolts/mounting plates.  Here's pictures of the 'behind the seat' mounting points I made for one of my trucks - looks similar to what you're doing, but I'm quite happy with the results. 

Good luck, 
Mike 
#72
Non Technical Discussion / White Oak seedling - free
Last post by binch - July 05, 2026, 04:06 PM
Anybody want a small white oak seeling (about one foot tall right now) for their yard??????   It's growing behind the fence and it' the perfect size to transplant.    I'm in the SW corner of Edmonton

pm me

cheers, Bill
#73
Technical Discussions / Install lap seat belts
Last post by Green Hornet 88 - July 05, 2026, 04:04 PM
 I'm attempting to install lap seat belts in my Series 2 88 Land Rover. I'm trying to determine where to anchor the door side belt. With the appropriate size bolts (7/16 8grade) and backing (spreader).
I'm looking at 3 possible sights. 1. Thru the seat box and sill. 2. Thru the box pillar and vertical sill support.  3. The corner of the base tray of the tub.  I plan to install the center anchors along this base tray with an underlay of angle iron and spreaders.
My 2 easiest options are to bolting the door side anchor bracket to the existing tubs vertical pillar, enlarging  the hole on the sill vertical brackets to take the required anchor bolt and a spreader in behind or enlarge the bolt hole down thru the seat box the sill bar and a spreader.
I've posted some photos to hopefully show the project.
If anyone has installed these anchor points or did something else I'd appreciate suggestions. 
Cheers Craig
#74
Events / Re: 2026 Reynolds museum ultim...
Last post by binch - July 05, 2026, 04:02 PM
Any chance I can get a volunteer to shuttle one of my vehicles to the Reynolds show please?????
#75
Events / Re: Edmonton Monthly Gathering
Last post by binch - July 05, 2026, 04:00 PM
Another reminder folks.....
ALRE gathering for JULY is this wednesday
As the first Wednesday of July falls on a stat holiday we are going to move the gathering to the second Wednesday of the month:
Gathering will be July 8th (this wednesday)
PEARL River RESTAURANT
4728 99 St NW,
Edmonton, AB
T6E 5H5
780 435-2016

July 8th from 6pm to 9pm

(It's a small plaza, 3 blocks north of the Whitemud FWY on 99st. on the west side of the road, with lots of parking) 
We will return to our normal  schedule (first wednesday of each month)

Cheers, Bill
#76
Events / Re: 2026 Reynolds museum ultim...
Last post by Chris - June 30, 2026, 03:06 PM
Thanks bill!! I never got these emails for some reason
#77
Events / Re: 2026 Reynolds museum ultim...
Last post by binch - June 26, 2026, 01:23 AM
Hi Chris (et al),

I have received a note from Reynolds Musuem that directly relates to our group.  Here it is:


The July 11, 2026 Ultimate Car Show is right around the corner!
To help get more that 600 show vehicles safely parked, we are assigning row letters and posting signs for car clubs.

Your registration indicates that your parking selection is Alberta Land Rover Enthusiasts and your
assigned row letter is J (see map below)

 
Arrival Details

Enter through the main gates to Reynolds Museum between 7:30 am and 9:30 am. Arrive early to help avoid long lineups.

Volunteers will direct you to one of two entrances onto the Display Field.

Row letters will be clearly indicated with markers at the end of each row.

Your registration indicates that your parking selection is Alberta Land Rover Enthusiasts Your assigned row letter is J (see attached map)


The gates to the Display Field will close promptly at 9:30 am.

Once you are parked, please check in at the Registration Tent.

For the safety of our guests, we ask that all participants remain on site until 4 pm.

If you must leave early due to an emergency, please contact one of our parking volunteers. They will help guide you out safely.

Sunshades
Sunshades are welcome, but they must be set up within a parking space beside your vehicle, not behind vehicles. This helps keep rows straight and ensures lanes remain clear. All sunshades must be properly secured.

Clubs
A sign with your club's name will be posted in your designated parking area.

Clubs are asked to arrive on site as a group.

NOTE:  Gathering in the main parking lot will no longer be permitted. If you need to reserve space in your reserved section for later arrivals, this will need to be managed within your group.

Not with a club?  If you are parking with a friend, please arrive together.  We encouraged you to park in your assigned row, but if you wish to park with someone else, feel free to do so.

Bringing a trailer?
Trailers will be directed to the East Field near the Outdoor Aviation Display for unloading.

What to Bring
Sunscreen
Insect repellent
Hat
Water

A donation for the Wetaskiwin Food Bank
You cannot view this attachment.
Enthusiasm!


#78
Events / Re: Edmonton Monthly Gathering
Last post by binch - June 23, 2026, 10:03 PM
NOTE:  Edmonton Gathering for July will be MOVED to JULY 8th.

Greetings all,

As the first Wednesday of July falls on a stat holiday we are going to move the gathering to the second Wednesday of the month:

Gathering will be Wednesday, July 8th.

Location will remain the same:

PLEASE NOTE EDMONTON AREA GATHERINGS NEW ADDRESS:

PEARL River RESTAURANT
4728 99 St NW,
Edmonton, AB
T6E 5H5
780 435-2016

July 8th from 6pm to 9pm

(It's a small plaza, 3 blocks north of the Whitemud FWY on 99st. on the west side of the road, with lots of parking)

Please make note of the change on your calendars

Cheers, Bill
#79
Non Technical Discussion / Re: Radio holder
Last post by Chris - June 23, 2026, 07:46 PM
you got it sir, see you there
#80
Events / Re: 2027 Alexander Mackenzie
Last post by Red90 - June 23, 2026, 04:46 PM
Quote from: B-Red on June 07, 2026, 01:01 PMYou might as well put me down.
What are the chances that the Lightweight will make this trip???
[/quote]

The trail is quite easy.  As long as you are okay with the road drive, there is no issue.