Author Topic: Defender Parts  (Read 333 times)

DBrands

  • Club Member
  • *****
  • Posts: 83
  • Club Membership: Yes
Defender Parts
« on: May 10, 2021, 10:37 AM »
I'm got a shelf full of too many pieces I likely won't use again...

Set of Bilstein 4600 Shocks (Blue/Yellow) Used but still functioning properly - $150 for all 4
Four tube style riveted rover steel wheels (black) with used Nokian Hakka LT winter tires 235/85/16 (tires are older but 85%+ tread, one tire has sidewall tear and needs replacing) - $250
OME 2764 Medium Duty Springs (near new condition, often used on rear of 90s for small lift, higher load capacity) - $100
110 Stock Front Springs
90 Stock Front Springs
200tdi fan shroud
Rear Prop (for 90, near new condition) SOLD
Narrow Radius arms with decent bushings SOLD
Stock Trailing Arms SOLD
Britpart Standard Plastic Front Grill
Pintle Hitch (not NATO style)
10mm Spring packers x4
Stock 10&24 spline shafts Front/Rear
Rear used aftermarket rear cross-member
3.54 Ring and Pinions
Stock Defender Heater

Bring your offers.
Most will probably go to the metal recycler in a few weeks otherwise.

« Last Edit: June 11, 2021, 01:46 PM by DBrands »
David B

1990 D90 - 200TDI

JohnnyO

  • Club Member
  • *****
  • Posts: 56
  • Club Membership: Yes
  • Vehicle: 1994 NAS Defender 90 CDN#70
Re: Defender Parts
« Reply #1 on: May 10, 2021, 11:02 AM »
I’m wondering what rims these are. I’m specifically looking for ANR1534.  That’s the 130 kind with the deep offset. The ANR number should be stamped into the metal.


Sent from my iPhone using Tapatalk

headdamage

  • Sr. Member
  • ****
  • Posts: 426
  • Vehicle: RRC 200tdi, exmil 90, 2006 Duramax
Re: Defender Parts
« Reply #2 on: May 10, 2021, 11:31 AM »
200tdi fan shroud is rocking horse poo...

DBrands

  • Club Member
  • *****
  • Posts: 83
  • Club Membership: Yes
Re: Defender Parts
« Reply #3 on: May 12, 2021, 04:46 PM »
I’m wondering what rims these are. I’m specifically looking for ANR1534.  That’s the 130 kind with the deep offset. The ANR number should be stamped into the metal.


Sent from my iPhone using Tapatalk
These are 5.5" rims.
David B

1990 D90 - 200TDI

DBrands

  • Club Member
  • *****
  • Posts: 83
  • Club Membership: Yes
Re: Defender Parts
« Reply #4 on: May 12, 2021, 04:46 PM »
200tdi fan shroud is rocking horse poo...
I hear rocking horse poo is a good investment these days!  ;D
David B

1990 D90 - 200TDI

lovejugs

  • Club Member
  • *****
  • Posts: 34
  • Club Membership: Yes
  • Vehicle: many lol
Re: Defender Parts
« Reply #5 on: June 03, 2021, 05:30 PM »
hi Dave do you still have the prop and trailing arms?
Dave L

DBrands

  • Club Member
  • *****
  • Posts: 83
  • Club Membership: Yes
Re: Defender Parts
« Reply #6 on: September 08, 2021, 10:06 AM »
This stuff is still taking up space!
David B

1990 D90 - 200TDI