Text Only | Text with Attachments

Alberta Land Rover Enthusiasts Club Forum

General => Technical Discussions => Topic started by: dijansmith on October 10, 2022, 02:50 PM

Title: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: dijansmith on October 10, 2022, 02:50 PM
I am installing my front brakes and I am not sure where the feed brake line for the lower cylinder goes. I know it connects both cylinders, but does it go to the front to the rear of the axle? internet pictures are not clear in the exploded views.
Title: Re: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: dijansmith on November 30, 2022, 07:44 AM
So no one has this answer?
Title: Re: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: Red90 on November 30, 2022, 10:41 AM
Upper to lower line is in the front of the axle.  Feed line is the top rear. You need to take the backing plate off and lift up in order to bleed.

 [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: dijansmith on December 02, 2022, 02:54 PM
Thank you for the info Red90.
Title: Re: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: dijansmith on December 08, 2022, 09:45 AM
Ok Red90. Your brake cylinders are off a Defender correct?
Title: Re: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: Red90 on December 08, 2022, 10:21 AM
Quote from: dijansmith on December 08, 2022, 09:45 AM
Ok Red90. Your brake cylinders are off a Defender correct?

The picture above is a 109 front axle. Defenders are completely different.
Title: Re: Front brakes for my 109 with dual cylinders per side. INFO NEEDED!
Post by: dijansmith on December 08, 2022, 08:23 PM
Got it see it now...
Text Only | Text with Attachments