Alberta Land Rover Enthusiasts Club Forum
Classifieds => Parts for Sale => Topic started by: Trevor on March 31, 2019, 11:20 AM
I've got 2 pairs of never used rear brake discs for a D90, EBC is the brand. PN# DA4152. Looking for $90 for each set.
https://www.johncraddockltd.co.uk/land-rover-defender/defender-90-and-110/parts/brakes/da4152-ebc-rear-slotted-performance-brake-disc-1-pair-def-90-1987-onwards-rrc-and-disco-1-1986-on.html
FYI These rotors are equivalent to LR017953 & FTC1381 and should fit defender rear1987 onwards.
And they are a good product too!!
Actually they DO NOT fit my '98 110 Bill....hehe, that's why I have two sets of them. I've imporperly ordered them twice now over the last 5 years :).
They are a 1/4" too shallow on their hub depth to run in a 110. These are right around 2" deep, the rear discs on my Camel are 2 1/4".
Now perhaps my Camel has some oddball setup?
There is a standard disc listed for the 110's, FTC3846G, that I believe is the correct one...er, I'm hoping at least, I don't need anymore that don't fit! :)
That said, these are a really good disc, if you've got the right rig for them!
Quote from: binch on March 31, 2019, 12:13 PM
FYI These rotors are equivalent to LR017953 & FTC1381 and should fit defender rear1987 onwards.
And they are a good product too!!
Defenders did not have rear discs until mid 93.
They should fit Disco 1 and RRC though.
With the disco conversion Kits for the early 110's and defenders you could use disc brakes on the rear. I just don't recall the details......
But LRSERIES.com and BP says:
Product Description:
Solid rear brake disc.
Part number:FTC1381 (which is equivalent to DA4152)
Applicable Models:
Defender 85> 90" & 110"
Discovery 1 89-98
Range Rover Classic 85-94
S/S FRC9831
S/S FTC86
S/S FTC461
S/S FTC462
S/S LR017953
"For exact change over points with vehicle applications please contact your local Britpart distributor with the full chassis number for the correct application."
------------------------------------
For FTC3846 (from my parts manual says from vin LA930435-110 / LA9340546 - 130)
Rear brake disc, solid, for 110 models. Defender to vin WA159804
Can be used instead of FRC7329 Solid front axle brake disc.
Also fits Defender 110" rear to vin WA159806 - S/S LR017951
Part number:FRC7329 Applicable Models:
Discovery 1
Range Rover Classic 86-90 to vin FA399972
Defender
Clear as mud yeah?
Found it!!! FTC1381 was the part number that Colin used on his salsbury axle disc brake conversion....and I followed his lead ;-)
In fact.....I'll take a set of those rotors off your hands trevor!!!!! Since I have the same ones I can keep them as spares and I think I use the same ones (EBC) ;D
Sounds good Bill, 1 set reserved for you. I'll bring them by when I come get my next BP order.
LR017951 FTC3846 BR1792R
110s to 1998.
298 mm diameter, 14 mm thick, 70.1 mm width. Dimensions are the same as front discs, so I'm unsure as to why the different part number?
FTC1381 LR017953
Discovery 1 (all), Defender 90 (all, mid 1993 on), Range Rover Classic 86-95
290 mm diameter, 12.5 mm thick, 61.4 mm width.
SDB000330AP LR018026
110s - 1999+
298 mm diameter, 14 mm thick, 59.1 mm width. What is interesting here is they narrowed the discs. I assume that they must have changed the caliper mount at the same time.
Well I am glad you have sorted the part numbers for 110 disc brakes. Trevor's discs will not fit my 110 so I don't have to be >:( and annoyed that I just ordered new discs and find 2 of them could have been sitting in Trevor's garage all this time. I ordered FTC3846G for my rear axle.