Alberta Land Rover Enthusiasts Club Forum
General => Technical Discussions => Topic started by: Green Hornet 88 on December 08, 2024, 01:08 PM
Hey folks! Finished my outside projects. Moved into the garage and back working on my landrover! I've been going thu my jars of bolts trying to find bolts for door hinges and windscreen bolts to the bulkhead capsulayed nuts? Found a bolt that fit, I measured it out 5/16 with a 24 Whitworth thread? So I'm assuming it's a BSF? Of course after checking all my bolts can only find 2! Some research looks like can't get locally? Need 8 for doors 1"-11/4" long? and windscreen 3/4"-1" long? Being hard to source wondering what other have done? Re threaded? Forced a different thread pitch? Ordered bolts from England? Any ideas? Cheers Craig
Probably move this to the Technical Section to make sure people see it.
Thanks for moving John. After a deeper dive/search, Found the door bolts. Still need 4 BSF?5/16ths 24 Whitworth threads 3/4"-1" length for the windscreen clap/lock to bulkhead? Or an alternate solution? Cheers Craig