Alberta Land Rover Enthusiasts Club Forum
General => Technical Discussions => Topic started by: Bucky on August 13, 2024, 09:32 PM
Hi All Does anyone know who can cut a new key and program a fob for a P38 in the Edmonton area apart from the stealership Thanks
The key can be cut at Royal Lock & Key on 97st? south of whitemud. Don't know if they do programming or not. They also sell the early defender keys blanks....
I have a 2004 disco without a key. You can buy new uncut keys on eBay, I don't have them yet but the ad says they are programmed.
Land Rover dealerships will cut to the Vin # charge you a lot and you will have a new key and a OLD lock.
Bill's suggestion will give you a new key and a new lock (barrel) you may have to take the lock out of the vehicle and take it to the locksmith with a disco key.
Quote from: stretch1940 on August 22, 2024, 07:20 AMI have a 2004 disco without a key. You can buy new uncut keys on eBay, I don't have them yet but the ad says they are programmed.
Land Rover dealerships will cut to the Vin # charge you a lot and you will have a new key and a OLD lock.
Bill's suggestion will give you a new key and a new lock (barrel) you may have to take the lock out of the vehicle and take it to the locksmith with a disco key.
Nope, that's not quite correct. If you have an original key royal can cut a key alone that will match your old key, but they won't have the fob. It will give you access but will NOT function with the security system...you'll still need a fob. From what I remember....if you can get a new fob (or even a used fob from a NA P38 of the same vintage you can use the car itself to progam to the vehicle. I just can't remember the exact step required. At least it worked that way for the Disco 2's of the same period.
:-)
I received the new keys for 2004 disco they are identical to the key to 2003 disco but not cut. They are programmed to a 2004 disco,they fit the lock, tight but they fit. I'm going to paint or use a marker on the edge of the key, insert the key into the lock move it back anf forth with downward pressure. Wherever there is a mark I will file there until it rotates. I hope!
I'm going to contact the seller and ask him if he sells a key and matching lock.
Sorry Bill I thought the locksmith would do both.
New plan, I found a site called lucky 8 4x4. they have an ignition lock and key set $134 us. I have 2 programmed key I bought on eBay $44. I sent a email to lucky 8 and asked them if I bought their ignition set could I have my programmed key cut from their keys and they said yes. That would give me a 2 programmed keys and 2 regular keys and a new lock for about $180 us
that works!