Print Page - Window bushing for a 2003 DII

Title: Window bushing for a 2003 DII
Post by: bumpydormobile on August 22, 2016, 06:18 PM

Does anyone know where to get one of these plastic bushings? or have a part number.
It keeps the arm in the metal track at the bottom.

Also...two of my doors will lock with the remote but not unlock, you have to open using the handle from the inside. >:(
Anyone with a fix?
Why did I buy one of these?...

Thanks
David

Title: Re: Window bushing for a 2003 DII
Post by: binch on August 22, 2016, 06:51 PM

Odds are you have to replace the window actuator as I don't believe the wheels are separate from the scissors mechanism. But I could be wrong....

This is the unit for the front right window http://www.roverparts.com/Parts/CUH102300 (http://www.roverparts.com/Parts/CUH102300)

They are dirt cheap ;)

Title: Re: Window bushing for a 2003 DII
Post by: bumpydormobile on August 22, 2016, 07:23 PM

Thanks Bill
Your idea of Dirt cheap is different than mine...$99. US for a plastic bushing!!!

Title: Re: Window bushing for a 2003 DII
Post by: B-Red on August 22, 2016, 07:39 PM

I recall that the parts yard on 50 Street and Argyl used to have two discos for parts. They seperated it for you. Might save few dollars on the actuators and door locks.
Emad

Title: Re: Window bushing for a 2003 DII
Post by: bumpydormobile on August 22, 2016, 07:56 PM

Thanks Emad
I'll give them a try.

David

Title: Re: Window bushing for a 2003 DII
Post by: Trevor on August 22, 2016, 09:04 PM

Yep, that's a complete actuator replacement if you are looking to buy new. I've had the same component fail.

Title: Window bushing for a 2003 DII
Post by: Red90 on August 22, 2016, 09:52 PM

Quote from: bumpydormobile on August 22, 2016, 07:23 PM
Thanks Bill
Your idea of Dirt cheap is different than mine...$99. US for a plastic bushing!!!

Unfortunately modern cars are not designed to be repaired. You replace assemblies.

On the positive side there is this guy around here that can buy parts really cheaply.

Title: Re: Window bushing for a 2003 DII
Post by: binch on August 22, 2016, 09:59 PM

Quote from: bumpydormobile on August 22, 2016, 07:23 PM
Thanks Bill
Your idea of Dirt cheap is different than mine...$99. US for a plastic bushing!!!

hahahah That was a pic of the piece. Check your email.......and you'll see what I mean by dirt cheap ;-)

Title: Re: Window bushing for a 2003 DII
Post by: Matt H on August 23, 2016, 12:12 PM

There are repair parts available. I've not tried these personally but forum threads I've read on the subject are positive.
At around $15 US for a set they are cheap enough to be worth a try.

http://www.shapeways.com/product/ZQNHTF3LW/discovery-ii-power-windows-rollers-v5

Hope that helps.

Title: Re: Window bushing for a 2003 DII
Post by: Red90 on August 23, 2016, 12:17 PM

Quote from: Matt H on August 23, 2016, 12:12 PMhttp://www.shapeways.com/product/ZQNHTF3LW/discovery-ii-power-windows-rollers-v5

Would make sense if the regulators were not so cheap.... http://www.paddockspares.com/regulator-front.html Bill would not say "dirt cheap" and not mean it. He is a frugal man ;D

Title: Re: Window bushing for a 2003 DII
Post by: Matt H on August 23, 2016, 06:56 PM

http://www.paddockspares.com/regulator-front.html

Wow, that really is dirt cheap! In fact dirt may be more expensive than a new regulator.
Crazy.

Title: Re: Window bushing for a 2003 DII
Post by: binch on August 23, 2016, 09:19 PM

Quote from: Red90 on August 23, 2016, 12:17 PM
Would make sense if the regulators were not so cheap.... http://www.paddockspares.com/regulator-front.html Bill would not say "dirt cheap" and not mean it. He is a frugal man ;D

Where's the icon for laugh out loud or roll on the floor laughing ;D

Alberta Land Rover Enthusiasts Club Forum

General => Technical Discussions => Topic started by: bumpydormobile on August 22, 2016, 06:18 PM