Text Only | Text with Attachments

Alberta Land Rover Enthusiasts Club Forum

General => Technical Discussions => Topic started by: brendan leier on September 10, 2020, 10:07 PM

Title: 200tdi boost gauge install
Post by: brendan leier on September 10, 2020, 10:07 PM
My fine brothers, I want to install a boost gauge on my disco and I'm wanting to know where other folks are drilling and tapping to install engine side? Many thanks in advance! Brendan
Title: Re: 200tdi boost gauge install
Post by: DBrands on September 14, 2020, 03:23 PM
If you want to drill and tap, somewhere in the intake manifold is best.
You can just install it in the wastegate pipe, which is quick and easy.
The pressure drop across the pipes/intercooler shouldn't really be much to be concerned about.
Title: Re: 200tdi boost gauge install
Post by: brendan leier on September 14, 2020, 04:51 PM
wastegate pipe it is!  many thanks!
Text Only | Text with Attachments