Alberta Land Rover Enthusiasts Club Forum
General => Technical Discussions => Topic started by: mike.heathcote on July 30, 2020, 06:24 PM
Hey all,
One of my dash lamps burned out, so I figured I'd try replacing with LED bulbs instead. Amazon has some E10 LED bulbs that screw into the existing plugs, which worked perfectly. Before /after pictures are attached - I'm sure it'll look better when its actually dark out, but the results so far are awesome! Less power usage, and much brighter!
Typical Rover, the project was not without its snags... my speedometer has holes for two lamps, yet only ever had 1 lamp installed. I had a bit of trouble finding a second bulb holder, so I made a new one this afternoon.
Thanks,
Mike
[ This attachment cannot be displayed inline in 'Print Page' view ]