Alberta Land Rover Enthusiasts Club Forum
Classifieds => Wanted => Topic started by: B-Red on November 23, 2020, 12:25 PM
My front blower fan stopped working on my Disco 2 1999. I replaced the fan but it still does not work. So, I am assuming the resistor is the next item to check. Does anybody have a spare part for a used resistor. Part number is JGN100010G. I can pick up within Edmonton area.
Emad
Did you measure the voltage at the fan terminals? across the resistor to ground? How much current is flowing when fan switched on?
Quote from: ugly_90 on November 23, 2020, 12:58 PM
Did you measure the voltage at the fan terminals? across the resistor to ground? How much current is flowing when fan switched on?
I replaced the motor with new one with no luck. I hear a hum coming on when I turn switch on. Not much movement though. Did not check voltage or current
B-Red - the 2000 disco 2 that just got listed at Edmonton PNP may have that resistor if you are still looking?
Quote from: Lukester on December 19, 2020, 01:19 PM
B-Red - the 2000 disco 2 that just got listed at Edmonton PNP may have that resistor if you are still looking?
Thank you. I temporarily solved the problem by leasing a new car. Between the weather and work I ran out of time and patience. I will deal with it in the spring. Thank you for the tip.
Cheers