Alberta Land Rover Enthusiasts Club Forum
Classifieds => Wanted => Topic started by: DBrands on March 17, 2019, 11:04 AM
Putting a feeler out for some decent Series III door bottoms to fit to my 90 while I fix the one piece doors. Any in Alberta looking for a new home?
David
Is your truck ex-MOD? If not, it will not fit Series 3 doors without modifications. The check hardware is different with regular Defenders. MOD Defenders had check hardware designed to work with Series 3 doors. You can buy half doors built to work with Defenders, but new does not sound like what you are after.
Quote from: Red90 on March 17, 2019, 11:43 AM
Is your truck ex-MOD? If not, it will not fit Series 3 doors without modifications. The check hardware is different with regular Defenders. MOD Defenders had check hardware designed to work with Series 3 doors. You can buy half doors built to work with Defenders, but new does not sound like what you are after.
I cut up an ex-mod bulkhead a while back and the bolt hole pattern was the same. I've got the bulkhead-side brackets from it. Don't I just need the half door, door-side hardware to match?
If you have the check strap parts from an MOD and the door catch it should work.
Quote from: Red90 on March 17, 2019, 06:03 PM
If you have the check strap parts from an MOD and the door catch it should work.
Thanks for the insight John. Now to track down some doors and door-side hardware...