Alberta Land Rover Enthusiasts Club Forum
Classifieds => Wanted => Topic started by: Troy on August 25, 2022, 10:58 AM
Looking for a suffix D or newer 2A transmission or a later suffix 3 transmission. One needing a rebuild is ok . Thanks Troy. troyclayton@shaw.ca
Troy
I have a suffix E gear box, from a six cylinder '67 NADA. Not sure if it will work for your needs
David [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
Quote from: bumpydormobile on August 29, 2022, 05:20 AM
Troy
I have a suffix E gear box, from a six cylinder '67 NADA. Not sure if it will work for your needs
David [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
The bellhousing bolt pattern for the 2.6 NADA 6 and the 2.25 are different. Would require a bellhousing swap in order for it to work (unless it has already been done, not sure if this came right off the 2.6 or not).
When I got the truck it had a 6 cyl Chev with the Scotty adapter.
Sorry for the late reply , I would be interested in the transmission possibly , tried to pm you but cannot seem to be able to , can you please contact me troyclayton@shaw.ca or 250-608-2709 thanks . Troy
Quote from: bumpydormobile on September 01, 2022, 04:07 PM
When I got the truck it had a 6 cyl Chev with the Scotty adapter.
Depending on the version of the adapter, it could still be using the 2.6 bellhousing or could be a 4 cylinder. Like all things when it comes to Series Land Rovers, so much can be swapped that what it is, is not always what it should have been from the factory.
The transmission has been sold.