Disco 2 Cooling problems under load

[binch]

The x-eng items that BP carries are designed to be tightened and loosened by hand so the plastic threads in the hole are stripped out.   They run a bit over 6 bucks.

http://www.britpart.com/parts/repair-and-service-parts/repair-and-service-parts/engine/bleed-screws/

[Red90]

Lots of people replace the whole tee with a steel version. That is certainly the way I would go long term.

Bill are you sure that is 10 mm?  I thought TD5s used a 6 mm bleed.

[binch]

Now that's a good question......I'll have to ask ???

[binch]

Yup, That aluminium screw will fit both the td5 and the petrol engines. ;)    And you have a choice blue or red. ahhahahhah