Text Only | Text with Attachments

Alberta Land Rover Enthusiasts Club Forum

Classifieds => Wanted => Topic started by: Gardenome on July 22, 2018, 07:51 PM

Title: Mirror mod
Post by: Gardenome on July 22, 2018, 07:51 PM
My wing mirrors suck. I've noticed these bolts on both my doors which I suspect were for some after market mirrors.

(https://uploads.tapatalk-cdn.com/20180723/02a24a56c680971ea249e446ebf32f20.jpg)

Can anyone recommend something that might fit?

Thanks. Ian


Sent from my iPhone using Tapatalk
Title: Re: Mirror mod
Post by: Gardenome on July 28, 2018, 08:06 AM
Having done some research, we're pretty sure defender mirrors would work. Anyone local have any spares or at least one I can borrow to confirm.


Sent from my iPhone using Tapatalk
Title: Re: Mirror mod
Post by: Red90 on July 28, 2018, 08:22 AM
Check the bolt spacing. The Defender mirror bolt spacing is 60 mm and they use 1/4" UNF bolts.
Title: Re: Mirror mod
Post by: Gardenome on July 28, 2018, 09:30 AM
60mm confirmed


Sent from my iPhone using Tapatalk
Title: Re: Mirror mod
Post by: Red90 on July 28, 2018, 02:38 PM
Should bolt straight on then.  If you do not find used easily, new ones are very cheap.   Less than $20 for an arm and mirror.

https://www.lrdirect.com/MTC5083-Mirror-Arm-90-110-Rh-Lh/
https://www.lrdirect.com/MTC5084-Mirror-Head-90-110-Rh-Lh-Convex/
Title: Re: Mirror mod
Post by: camo388 on August 07, 2018, 08:40 PM
I've been doing a bit of sorting of my LR parts and may have a couple mirrors for you.  If I have spares, I can leave them at Bill's house when I'm in the city next Tuesday as I have other things to leave with Bill anyway.  I'd bring to September meeting but not sure if I will make that meeting.  My wife and I are off to New Zealand to celebrate her mother's 100 birthday. 
Text Only | Text with Attachments